Storms are exhibiting some decent shearing aloft over NW New Mexico when comparing to NE New Mexico. Something I might not have noticed had I not had this product as I don’t always have time to go into the SPC mesoanalysis and check various levels of shear values. The 0-8km shear values are in the 40-50 kt range, in agreement with the range of values noted on the speed shear values of OCTANE. See below.

PHS really doing a nice job of pointing out peak areas of MUCAPE and where storms will likely develop. Decent scale and resolution results in some good quality comparisons with various other products. This is over the southern ABQ CWA.

Forecast Layer Comp Refl 21Z

Forecast MUCAPE 21Z

Forecast MUCAPE 23Z – Also, noting a sharp gradient in MUCAPE values as convection strengthens over east-central New Mexico late this afternoon into the early evening hours. We will have to see how this plays out.

MUCAPE values seem a bit higher than they should be when compared with the MLCAPE values at the same times over New Mexico. I’m not exactly sure why the values are so high, but the forecast RAP values for the same time frame appear to be notably more displaced to the east and lower.

Example below from forecasted time 02Z.

The 6 hour forecast at 21z of PHS 0-6 km Bulk Shear (first image) is compared against the 21z SPC Mesoanalysis (second image). Overall, the PHS forecast did quite well over New Mexico. There is generally little to no shear across the state except for near the Four Corners in the northwest and far southeastern New Mexico. The values are reasonable in these areas as well, around 16 m/s for PHS which fits in with the over 30 knot SPC values.These differences can be noted in the convection occurring as well (seen in the SPC image). Mainly isolated cellular over central NM, but showing more organization in the areas of higher shear.

-Satellite Steve and Burton Guster